It has many advantages such as beautiful appearance, skid resistance, strengthening performance, saving steel and so on. It is widely used in transportation, architecture, decoration, equipment, floor, machinery, shipbuilding and other fields. Generally speaking, the use side is not very demanding on the mechanical properties and mechanical properties of the floral plate, so the quality of the pattern board is mainly characterized by the pattern of flower pattern, the height of the pattern and the height of the pattern. At present, the thickness commonly used on the market is different from 2.0-8mm, and the width is 1250 and 1500mm two. 

Note: 

1. plate width to 1800mm, according to 50mm into the stage; length from 12000mm to 100mm into the stage. 
2. pattern height is not less than 0.2 times the thickness of the base plate. The size of the diagram does not serve as the basis for the inspection of the finished product.
3. the grades of steel plate shall be specified according to GB/T700, GB/T712 and GB/T4171.
4. the mechanical properties of the steel plate are not guaranteed. When the demand side is required, it can be stipulated by the parties according to the relevant standards.
5. the steel plate is delivered in hot rolling state.